Shorty pegs for you Lane Splitting White Lining Chopper Freaks!

These Shorty Pegs Measure in at 2.5” long (not including mount). These pegs work well on narrow lane splitters, show bikes, just your weirdo chopper. They are also great pegs for bikes that only have a passenger occasionally. They have our signature features including dished ends and a high attention to detail. Our pegs are available with a variety of mounting options for most Harley’s and other custom applications. Ever had a broken brass mount? Our specialty folding steel/stainless mounts are bomb-proof. You will be hard pressed to find another set of pegs on the market like these!

Brushed Brass Rippled Shorty Pegs with male Harley mounts.

Brushed Brass Rippled Shorty Pegs with male Harley mounts.

Antiqued Brass Rippled Shorty Pegs with male Harley mounts.

Antiqued Brass Rippled Shorty Pegs with male Harley mounts.

Hexing Gas Caps

What’s this? Hexing gas caps for modern Harleys with threaded (non bayonet) fillers. Available in Brass or Aluminum. They are indexable up to a quarter turn so the flats of the cap will not fall in some arbitrary alignment when you tighten the cap down into the gas tank filler. Check out the link below for more info!

https://www.deepsixcycles.com/gas-tanks-fenders/hexogram-gas-cap

Blog RSS

Quick,Short & Custom

  We are going to keep this post short and sweet. It's Friday, the clock is ticking and the candle is still burning at both ends. Here are some of the things we have whipped recently. 

We do a lot of custom work. Such as these Brass Wheel Spacers.

Aluminum Hexing Grips!

Send us your Kick Arm and we can add our kicker pedal to it!

How awesome is this conversion!

Shine on!

I made Billy D from Hellmuts a set of brass for his little Triumph a few years ago. The bike has been getting a bunch of attention lately. I have to say I dig it!

Shaving up those fork legs. We can leave the brake mounts or remove them too.

So, put yours in the mail already...

Making handle bar radness!

Keep any eye out we have our hands in various phases of a few builds, Engine builds and little one off jobs. Keep checking back for updates on all the cool stuff that is going on!

A New Home For a New Little Lane Splitter!

  The raffle bike has a new home, can you believe it? It will be on it's way to V.A. shortly! We would like to thank every one who has helped us with this raffle. This raffle never would have happened with out partnering with East End Moto/Flying Chairs to make it happen. They  supplied the bike and a slew of other help and support while we worked together to make this happen. Butt's Chop Shop came threw with a bad ass donated paint job! The Burger Bar, Lazy Diamond & The Double Crown sold the heck out of tickets as did a few of our friends. Hard Drive sponsored our efforts and kicked down some parts for the bike. And of course special thanks to every one else who worked behind the scenes to help us out with this whole deal. We are really looking forward to handing a check to Richard Page to help out with the hospital bills from when he went down this winter/fall.

 Check out this short video I made if you could not make it to The Melt Down in Hendersonville where we held the drawing. We had a great time seeing old friends and making some new ones. Come check out The Melt Down next year if you are in the area! Those Ton Up Highlands guys put on a heck of an event! 

New, Old, Awesome!

We have been cranking out the same old awesome while adding some new products too! Check out the new kicker mod we are offering for XS650s! Send us your kicker and we can hook it up to match the other pegs we offer! We know you have been having a hell of a time finding a cool XS650 kicker pedal and pegs, we got ya covered...

Oh Yeah we still do awesome in brass too...

Carnage and the Beast! Oh wait, I mean beauty!

If you have not been paying attention to our posts on other social media you may not have realized that I managed to completely decimate the sprocket cover on my Ironhead Sportster chop.

Here is the carnage! Opps!

I was going to construct a whole new mount/ sprocket cover. But since I just wanted it done so I could ride I buzzed it back together. Hopefully this winter I will be able to get around to ordering up some material and fabbing one up!

Oh and this is just another one of those slammed mornings getting everything shipped out! 

Deep Six Cycles Stainless Rabbit Ears and more!

I made these bars the other week. I still have a set for sale. Polished 1" Stainless Steel Rabbit Ears with Polished manually machined brass pressed on. 3.5 mounting pattern. $285 plus shipping for this pair. Email DeepSixCycles@gmail.com Or check out our online store for more info! deepsixcycles.bigcartel.com
 

 Oh and we can hook you up with pegs for those funky Ironhead and Shovel mounts!

We have been selling quite a few of our brass products with and antiqued finish. See those pegs on the left?

And these antiqued foot pegs and hand grips.

Here are a set of Brass Hexogram Pegs, Brake peg and Grips with a special custom spin.

Just a good ole week. Never meanin no harm...

What have we been up to? Well, really just settling into the new shop with East End Motorsports. Setting up the new spot, arranging, organizing and turning out products.

We still ship Iron Pony Express from time to time.

Wait, could it be? Brass Pegs that fit Ironhead Sportsters and Shovelheads? That's it man, we have them you want them!

Did I mention that we have 1" Brass Foot Pegs for Iron Head Sportsters and Shovelheads? You know the ones you can't get nice pegs for any where. They fit those big ugly male frame mounts!

Here are a whole set of antiqued or "aged" brass hand grips and footpegs! I bet you didn't know we offered so many types of finish on our products.

Here are a few more shots of the pegs. This has been a much requested finish on our brass products lately!  

Here we have our antiqued finish brass pegs on the right with common Harley style mounts on the left. One of our polished brass jockey/suicide shift knobs in the center and our brass "Screw It" footpegs fitted with mounts for Ironhead and Shovelhead Harleys.

Did you know that we still manually machine our parts? I know it's like the 50's never ended!

Some times we get requests to produce a part based on one we offer already but with a little twist to fit our customers needs or taste. Take this set of Deep Six Cycles Hexogram brass handgrips. They feature a double hex on one end.

Yes I know only old guys do it this way. Finishing up more parts and they are gone, gone, gone!

I was forced to go down town the other day... Strangely The Cobblers Shoe (my bike) didn't have anything to do with my morning in traffic court.

What have we been up to? Well lets have a look!

  I have been working on a new line of Rabbit Ear or "Pull Back" bars. They have a turned piece of brass pressed over the cross bar on them. These bars are reasonably priced at $115 plus shipping. Get them powder coated black while leaving the brass as it and watch every ones mind blow! We can also do variations on this design including making them from Stainless Tubing. They look great with our Brass Grips, Pegs and other accessories. Check out our Web Store- Click here to see our Store! Or email us for more info- DeepSixCycles@gmail.com I still have a ton of ideas I need to put into production so keep checking back to see the latest!

Today we happened to get some large hunks of brass in! So naturally we machined some into a super duty groovy gas cap cover!  We will have them available in the web store affixed to gas caps as a turn key custom solution with in the next few weeks. If you would like to pre-order one or would like to request a quote on having an item custom machined for you please send us an email! DeepSixCycles@gmail.com

Shots in the dark.

I find myself shooting photos of things. Some of the time these things make it to instagram or various other forms of social media, often times they are posted one place and never make it to the blog. Here are a few photos from last week. I tend to take a lot of the shop stuff for granted just because I see it every day and never think to shoot it. There are probably a lot of missed opportunity's.     

 

This clutter of the day is a bunch of material in different stages of machining, or just finished.

Here is the finished bore for a set of brass grips with a Joker Machine throttle tube being test fit. P.S. they run a bit small.

 

These would be our finished Brass Grips with the Joker Machine Throttle tube installed

Just an ole handle bare fixture.

 

Just the ole splitting of an ole handle bar fixture.

And this ole pic of my ole bike "The Cobblers Shoe" 

6" Hourglass Window Bars

We are still cranking out our signature Deep Six Cycles HourGlass window bars. We have some 6" rise bars in stock. Snatch them up while they are on sale! Or if there is something else you might want us to make for you send us an email and we can discuss what it will take.

DeepSixCycles@gmail.com
http://deepsixcycles.bigcartel.com/products 

Finish

Raw $100.00 USD

Sizes

6" Rise

Bar Size

1"

Pull Back/ Pull Down

30 Degree Pull Down & Slight Roll Back

Top Bar Length

22"

A Deep Six Cycles Equipped Steed. Captured by Frank Bott

  Recently I was lucky enough to have my bike shot by Frank Bott. Who is an amazing photographer and a lot of fun to work with. I feel very flattered that he has gone out of his way to track me down and convince me to let him shoot my bike.
  The interesting thing is this bike is not nearly finished. So I kept telling Frank I was not ready. But Frank was very persistent. And I realized, "what the hell life is short". Plus he suggested involving my family in the shoot and that really sealed the deal for me.
   This bike is at the moment my only personal runner. So that means keeping it up is a primary goal. Every thing else in life comes first over finishing it. And even though its winter I still commute to work on it often. So that makes taking it down to finish it unappealing. I will keep chipping away at it. Bit by bit part by part.

Please note our limited edition first generation D6C Tramper Bars. And the slight variation on our signature brass grips. I will add more hand made super far out chopperrific  parts when I have a little more time to spend on her. I think a top end job is in preparation for spring. So that will set me back. As I know I will be dying to ride after having her down a week or so. I hope you enjoy Frank Botts Photos of my Deep Six Cycles Equipped Chopper!

Frank Bott
Motorcycle Photography by Frank Bott
Facebook Motorcycle Photography by Frank Bott

Monday morning flash back!

Here is a shot I have never really used from an old shoot. You really begin to understand how the polished brass gleams...

XS650 Tracker Pegs Are In Stock Now!!!

Aluminum XS650 Tracker Pegs are back in stock in limited inventory! Buy em from the store the link is below. They may not last long!

Click Here For More Info

Fenders, Fenders, Fenders! (Aka try and catch me shipping)

We have a pile of these 7" Flat Fenders we are selling for 35$! Snatch one up while we have them! We have reduced our prices and they are moving like hot cakes!  These flat fenders were made just for us in a neighboring state! That's right that means these fenders were made right here in the USA! They are perfect for an Old School Chopper, Bobber or any Custom job you can dream up. This heavy gauge fender measures 25 3/4" long and 10 5/8" tall and fits a 16" wheel tire combo very well. Buy one with the PayPal button below or feel free to contact us with any questions you may have.

Customer Built with our Brass Grips

Here is a Picture of a Honda CB our customer sent us a pic of its rocking our 7/8" brass hand grips. Pretty cool little home build.

More Early Mornings and Late Nights!

Ok we have a some 7/8 Brass Hand Grips back in stock! We will be working on the 1" ones next. We have them both with a brushed finish and show quality Polish.

Get Em Here!!!

Early Mornings and Late nights!!!

We got these back instock and ready to go to a lucky home! Hit me up for a special request or grab em at the link below! We also do them for 7/8 bars with or with out Knurling, High Polished or Brushed!

Buy them here!

Making up for lost time!!! (AKA Choppertastic!)

Its back! We just gotta get rolling to build inventory up again. In case you didn't know I packed the shop up into storage when I found out Liz was pregnant with our son and found a job that was slightly more dependable. I always got by just fine but month to month there really was no telling if I could support myself the shop and a whole family... Well I'm back at it running nights and weekends from the house. If you see something you want let me know and I'll try to get it made up for ya!

http://deepsixcycles.bigcartel.com/products

Peg The Impaler (AKA Sharp-N-Pointy!)

Have you ever seen Deep Six Cycles Impaler Pegs or Grips? Keep your distance and mind your manners, these things are fucking dangerous!

Dig em!!!