Shifty (AKA Grab Em, Don't Grind Em)
Tom Bowie (Deep Six Cycles)
We offer our USA-made shift knobs in aluminum and brass with a variety of finishes. Check out this “diamond in the rough”! That brass sure does make an impact when it’s polished up!
Blog
Check in here to get news about our custom Harley Parts and see what we’ve been up too! All the word about new our Harley Davidson Parts Development, chopper news and trips! We have been making parts and providing fabrication services since 2007! Learn more about our USA Made Harley Parts here!
Filtering by Tag: chopper
Snow Go (Aka Riding it out)
Tom Bowie (Deep Six Cycles)
There's no feeling like riding choppers when there's snow on the side of the road or flurries in the air. It's a feeling I just can't explain especially in the mountains. On this day I found where they stopped maintaining the road when it snows in WNC.
What's old is still old again... (AKA Cobbler's Shoe Redux)
Tom Bowie (Deep Six Cycles)
Another in progress shot of the Cobbler's Shoe with the new to us Nikon. I've always been interested in photography and have needed a decent camera around the shop forever.
We may have something kind of big up our sleeves with this build. We'll have to wait to see which way things are going to turn out. We have some fun ideas for this build. Hopefully we will break them out this time around! The ole shop truck is always a work in progress…
Brass and Stainless-ness
Tom Bowie (Deep Six Cycles)
Check out these brushed Stainless Super Deluxe T Bars with Polished brass! Available at DeepSixCycles.com
Just barely had a chance to shoot these with our new to us but old Nikon d5000 before we sent them out! It's really nice to finally have a decent camera in house. Hopefully I'll get the hang of it sooner than later. If they weren't all packaged up to ship I think a slightly different F stop would have been ideal. But I'm still rather pleased.
Special thanks to intheweedsphotography for letting me bug him a little about photo stuff when I was trying to pick a lens, etc. 🍻🤘🍻
Halwade's SpartanKiller
Tom Bowie (Deep Six Cycles)
Back in the beginning of things, in the days when our little chopper scene was just an under current surfacing on blogs and forums beneath a sea of beach ball back tires and mile long stretched tank mainstream “customs”. A few short years after founding the shop I saw a thread on Chop Cult. Some one was looking to build a bike sourced with parts from as many solid little cottage shops from the 33 community as they could. I reached out and we made a deal. I remember polishing those manually machined pegs for days before I sent them out. I am so glad I have streamlined the process today. I did manage to see a few photos of the bike completed. I believe it had a feature on Chop Cult but honestly it could have just been a thread.
The other week I was searching around the web and found a link to it being featured in Hot Bike Magazine in the April 2015 Issue. I believe this was several years after having sent the pegs out to Magoo for the bike. I’m not sure why we didn’t make the build sheet in this Hot Bike article. We didn’t even have a website at the time of the sale and we were not as well known as we are today. But we’re still so stoked to have parts on the build. Thanks again Magoo! Check it out the article at the Hot Bike link below for more info!
https://hotbike.com/spartan-killer-ss-powered-custom/
Our Issue of Hot Bike April 2015 at the Milling Machine!
I believe this was posted on Chop Cult Back in the Day
I believe this was posted on Chop Cult Back in the Day
Check out the these Hot Bike Shots and read the original article at the Hot Bike link below!
https://hotbike.com/spartan-killer-ss-powered-custom/
Hexing Gas Caps
Tom Bowie (Deep Six Cycles)
What’s this? Hexing gas caps for modern Harleys with threaded (non bayonet) fillers. Available in Brass or Aluminum. They are indexable up to a quarter turn so the flats of the cap will not fall in some arbitrary alignment when you tighten the cap down into the gas tank filler. Check out the link below for more info!
https://www.deepsixcycles.com/gas-tanks-fenders/hexogram-gas-cap
Quick,Short & Custom
Tom Bowie (Deep Six Cycles)
We are going to keep this post short and sweet. It's Friday, the clock is ticking and the candle is still burning at both ends. Here are some of the things we have whipped recently.
We do a lot of custom work. Such as these Brass Wheel Spacers.
Aluminum Hexing Grips!
Send us your Kick Arm and we can add our kicker pedal to it!
How awesome is this conversion!
Shine on!
I made Billy D from Hellmuts a set of brass for his little Triumph a few years ago. The bike has been getting a bunch of attention lately. I have to say I dig it!
Shaving up those fork legs. We can leave the brake mounts or remove them too.
So, put yours in the mail already...
Making handle bar radness!
Keep any eye out we have our hands in various phases of a few builds, Engine builds and little one off jobs. Keep checking back for updates on all the cool stuff that is going on!
Honda CM450 Brat Style
Deep Six Cycles
Here is a Honda CM450 that we cut the seat section and shock mounts off and gave it our own touch. We also mounted the fender to the swing arm. Just an affordable little neo bob job or brat bike . If you would like your bike to under go a similar treatment contact us! We can do partial or full builds. We will modify any make model or brand.We can also supply new shock mounts and frame end caps for you to weld in if you want to do it your self. Don't hesitate to contact us about any thing you may need.
One of a kind.
Hand built tag mounts, Fender Struts and more.
Our good friend Zac made the bad ass leather battery bag
All new upper shock mounts too!
This solo seat pivot mount was a fun piece to make.
This bottom fender mount is bomb proof!
Deep Six Cycles Shirts! (A.K.A. Get one while they last!)
Deep Six Cycles
Deep Six Cycles Sweat Shirts, Long Sleeves, Tanks and Tees! Yeah that's right you can order them here! Go on and show that you support American hand crafted motorcycles and parts!
