Shorty pegs for you Lane Splitting White Lining Chopper Freaks!

These Shorty Pegs Measure in at 2.5” long (not including mount). These pegs work well on narrow lane splitters, show bikes, just your weirdo chopper. They are also great pegs for bikes that only have a passenger occasionally. They have our signature features including dished ends and a high attention to detail. Our pegs are available with a variety of mounting options for most Harley’s and other custom applications. Ever had a broken brass mount? Our specialty folding steel/stainless mounts are bomb-proof. You will be hard pressed to find another set of pegs on the market like these!

Brushed Brass Rippled Shorty Pegs with male Harley mounts.

Brushed Brass Rippled Shorty Pegs with male Harley mounts.

Antiqued Brass Rippled Shorty Pegs with male Harley mounts.

Antiqued Brass Rippled Shorty Pegs with male Harley mounts.

Robbers Bobbers (Mile Munching in Class)

My Dude Robbers Bobbers sent in these bad ass pics of his new scooter! Check out the twisted look on that control! He said he shaped the aluminum to get the twisted look to match his other work! I’m stoked to have our toe shift/brake pegs on this talented and down to earth dudes brand new bike! If you’re looking for some hand made twisted parts look this homie up!

Hexing Gas Caps

What’s this? Hexing gas caps for modern Harleys with threaded (non bayonet) fillers. Available in Brass or Aluminum. They are indexable up to a quarter turn so the flats of the cap will not fall in some arbitrary alignment when you tighten the cap down into the gas tank filler. Check out the link below for more info!

https://www.deepsixcycles.com/gas-tanks-fenders/hexogram-gas-cap

Blog RSS

A New Home For a New Little Lane Splitter!

  The raffle bike has a new home, can you believe it? It will be on it's way to V.A. shortly! We would like to thank every one who has helped us with this raffle. This raffle never would have happened with out partnering with East End Moto/Flying Chairs to make it happen. They  supplied the bike and a slew of other help and support while we worked together to make this happen. Butt's Chop Shop came threw with a bad ass donated paint job! The Burger Bar, Lazy Diamond & The Double Crown sold the heck out of tickets as did a few of our friends. Hard Drive sponsored our efforts and kicked down some parts for the bike. And of course special thanks to every one else who worked behind the scenes to help us out with this whole deal. We are really looking forward to handing a check to Richard Page to help out with the hospital bills from when he went down this winter/fall.

 Check out this short video I made if you could not make it to The Melt Down in Hendersonville where we held the drawing. We had a great time seeing old friends and making some new ones. Come check out The Melt Down next year if you are in the area! Those Ton Up Highlands guys put on a heck of an event! 

Deep Six Cycles Stainless Rabbit Ears and more!

I made these bars the other week. I still have a set for sale. Polished 1" Stainless Steel Rabbit Ears with Polished manually machined brass pressed on. 3.5 mounting pattern. $285 plus shipping for this pair. Email DeepSixCycles@gmail.com Or check out our online store for more info! deepsixcycles.bigcartel.com
 

 Oh and we can hook you up with pegs for those funky Ironhead and Shovel mounts!

We have been selling quite a few of our brass products with and antiqued finish. See those pegs on the left?

And these antiqued foot pegs and hand grips.

Here are a set of Brass Hexogram Pegs, Brake peg and Grips with a special custom spin.

Just a good ole week. Never meanin no harm...

What have we been up to? Well, really just settling into the new shop with East End Motorsports. Setting up the new spot, arranging, organizing and turning out products.

We still ship Iron Pony Express from time to time.

Wait, could it be? Brass Pegs that fit Ironhead Sportsters and Shovelheads? That's it man, we have them you want them!

Did I mention that we have 1" Brass Foot Pegs for Iron Head Sportsters and Shovelheads? You know the ones you can't get nice pegs for any where. They fit those big ugly male frame mounts!

Here are a whole set of antiqued or "aged" brass hand grips and footpegs! I bet you didn't know we offered so many types of finish on our products.

Here are a few more shots of the pegs. This has been a much requested finish on our brass products lately!  

Here we have our antiqued finish brass pegs on the right with common Harley style mounts on the left. One of our polished brass jockey/suicide shift knobs in the center and our brass "Screw It" footpegs fitted with mounts for Ironhead and Shovelhead Harleys.

Did you know that we still manually machine our parts? I know it's like the 50's never ended!

Some times we get requests to produce a part based on one we offer already but with a little twist to fit our customers needs or taste. Take this set of Deep Six Cycles Hexogram brass handgrips. They feature a double hex on one end.

Yes I know only old guys do it this way. Finishing up more parts and they are gone, gone, gone!

I was forced to go down town the other day... Strangely The Cobblers Shoe (my bike) didn't have anything to do with my morning in traffic court.

What have we been up to? Well lets have a look!

  I have been working on a new line of Rabbit Ear or "Pull Back" bars. They have a turned piece of brass pressed over the cross bar on them. These bars are reasonably priced at $115 plus shipping. Get them powder coated black while leaving the brass as it and watch every ones mind blow! We can also do variations on this design including making them from Stainless Tubing. They look great with our Brass Grips, Pegs and other accessories. Check out our Web Store- Click here to see our Store! Or email us for more info- DeepSixCycles@gmail.com I still have a ton of ideas I need to put into production so keep checking back to see the latest!

Today we happened to get some large hunks of brass in! So naturally we machined some into a super duty groovy gas cap cover!  We will have them available in the web store affixed to gas caps as a turn key custom solution with in the next few weeks. If you would like to pre-order one or would like to request a quote on having an item custom machined for you please send us an email! DeepSixCycles@gmail.com

Shots in the dark.

I find myself shooting photos of things. Some of the time these things make it to instagram or various other forms of social media, often times they are posted one place and never make it to the blog. Here are a few photos from last week. I tend to take a lot of the shop stuff for granted just because I see it every day and never think to shoot it. There are probably a lot of missed opportunity's.     

 

This clutter of the day is a bunch of material in different stages of machining, or just finished.

Here is the finished bore for a set of brass grips with a Joker Machine throttle tube being test fit. P.S. they run a bit small.

 

These would be our finished Brass Grips with the Joker Machine Throttle tube installed

Just an ole handle bare fixture.

 

Just the ole splitting of an ole handle bar fixture.

And this ole pic of my ole bike "The Cobblers Shoe"